{"title":"BOOST","description":"","products":[{"product_id":"benson-germanium-preamp","title":"Benson Germanium Preamp","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis pedal is based on our now famous amp-in-a-box Preamp Pedal with one important tweak: the replace-ment of the first FET transistor with a germanium gain stage (stolen from our servo-biased Germanium Boost pedal). The result is an alternate universe take on our flagship pedal that marries the incomparable feel of germanium with the careful equalization and tone controls of the preamp pedal.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe result is a slightly lower gain, but richer sounding and feeling overdrive\/boost\/fuzz\/whatever we really, really dig. We hope you like it!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBeware: Germanium stops passing music at 120 Degrees Farenheit (like a very hot stage)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePower requirements: 9VDC Boss style adapter or battery 50ma\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eControls: Gain (distortion), Treble (low pass filter), Bass (high pass filter), Volume\u003c\/span\u003e\u003c\/p\u003e","brand":"The Board Room","offers":[{"title":"Default Title","offer_id":49430290366787,"sku":"","price":319.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/BensonGermaniumPreamp.png?v=1769103732"},{"product_id":"29-pedals-flwr","title":"29 Pedals FLWR","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFLWR is, I guess, an overdrive! It makes gain, about 45dB, and can get up into fuzz territory at max settings. It’s designed to help you find your own breakup point, where pushing with the guitar breaks up nice and amp-y, but pulling back cleans up. The “SHAPE” controls affect the first gain stage, while the “GAIN” control affects the second gain stage. The clipping diodes are a modular sub-assembly, you can experiment and find your own magic arrangement. FLWR has a medium input impedance, so plugging right in will be a little warmer than when FLWR is following an input driver like EUNA. The output impedance is slightly higher to allow for interactions with other pedals. The WHATEVER power port accepts 7.5 to 35 volts of AC or DC in either polarity. FLWR is True-Bypass when switched off.\u003c\/span\u003e\u003c\/p\u003e","brand":"The Board Room","offers":[{"title":"Default Title","offer_id":49964585288003,"sku":"","price":349.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/29PedalsFLWR.png?v=1769104056"},{"product_id":"29-pedals-oamp","title":"29 Pedals OAMP","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eOAMP quickstart guide - It’s pronounced w-amp! OAMP is an output driver designed to replace a conventional output buffer or gain pedal at the end of your chain. If you’re familiar with EUNA, it’s a similar concept but with a few key differences. High headroom, clean gain, great drive capability. They key features are labeled below. There are subtle tonal variations in the gain settings. Maximum clean output level is 20dB. 29dB of gain available. OAMP makes enough gain to drive your amp into breakup without adding it’s own distortion, or you can use it to trim hot signals from your pedalboard. The insert loop is active when OAMP is OFF, so you can easily swap from clean drive to a dirt pedal, alternative preamp or anything you want really. With nothing plugged into the insert OAMP is True-Bypass when switched off.\u003c\/span\u003e\u003c\/p\u003e","brand":"The Board Room","offers":[{"title":"Default Title","offer_id":49964624544067,"sku":"","price":379.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/29PedalsOAMP.png?v=1769104401"},{"product_id":"29-pedals-jfet","title":"29 Pedals JFET","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eJFET (jay-fet) is a boost pedal rooted in my love of the JFET transistor, long-loved in the world of audio for its similarities to vacuum tubes. As always for 29 Pedals it’s a ground-up design, from a blank sheet of paper, an effort to elevate the humble boost circuit to something refined and tonally enhanced.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e The JFET circuit has three modes, N for “normal,” where a typical boost might sit in terms of frequency response, almost a treble boost but not quite. “F” adds a little more weight, and “X”, my preferred mode. “X” mode flattens the circuit all the way down to below 10Hz, giving you an incredible feeling of weight without sounding like additive EQ. The extension in the frequency response also tightens the phase and gives you an incredible, solid feel. The L control sets the level, it’s a fader after the boost circuit and before the output driver. This means the gain of the first stage is set, and you can use the fader to set the level into the output stage, so THD, hair, and tone remain the same throughout the travel. The output driver after the fader ensures that the output impedance remains consistent. JFET makes about 19dB of gain.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eJFET can be used after a buffer or input driver (like EUNA), and also can function as an always-on input driver at the beginning of the board. It sounds great following EUNA and also stacked with FLWR and OAMP. It will drive heavy loads and has high-headroom, making it equally happy at the end of your board. The same WHATEVER power input and relay-based switching as our other pedals, and instant-bypass whenever power is removed.\u003c\/span\u003e\u003c\/p\u003e","brand":"The Board Room","offers":[{"title":"Default Title","offer_id":52620845842755,"sku":"","price":349.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/29Pedals_JFET_STOCK_1copy.jpg?v=1740150369"},{"product_id":"benson-amps-germanium-boost","title":"Benson Amps Germanium Boost","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eWhen designing the temperature controlled fuzz, we tried some weird approaches. One of the things we tried was utilizing a voltage controlled error correcting circuit to bias a single germanium transistor. It ultimately didn’t work for the fuzz, since that circuit is comically sensitive to transistor gain attributes.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe did find a place for it though.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIt turns out it was PERFECT for achieving a germanium clean boost that, (like our fuzz) is impervious to component drift, leakage, and temperature....moreso in fact. We also fixed a couple other issues preventing the germanium transistor from being used as a convincing linear boost...we increased the input headroom (even a normal guitar signal will drive a germanium transistor into unwanted input distortion without some tweaks) and increased the input impedance (a BJT transistor would normally thin out bass frequencies and interact neg- atively with whatever flows into it).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe result is a germanium clean boost where you can utilize a germanium transistor WITH- OUT the weird artifacts that were previously accepted as part of the deal...temperature sen- sitivity, drift, and suboptimal input impedance and headroom.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIt takes about 10 seconds when the boost is first powered up for the error correction circuit to bias the germanium transistor. After that it gets interesting....we can hear how it makes guitar signals sound more musical...even when set at the same volume as the bypassed tone. It seems to bring out the attack of the guitar while simultaneously smoothing out notes, like a compressor but different. It’s hard to describe. It appears to cut the bad parts of a signal and enhance the good. It’s killer on bass. It helps acoustic guitar pickups sound more natu- ral. And of course it’ll push your amp into a frenzy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWe hope you like it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePOWER SUPPLY\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis pedal is for use only with a 9vdc Boss syle center negative power supply. There is space for a battery which is activated when a cable is plugged into the input, and there is no power supply plugged into the DC jack.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlease do not subject this pedal to more than 9vdc or the pedal or power supply could be destroyed.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWARRANTY INFORMATION:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 years excluding modification or damage. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.bensonamps.com\/\" class=\"text-blue underline focus-visible\" rel=\"noreferrer noopener\" target=\"_blank\"\u003ewww.bensonamps.com\u003c\/a\u003e\u003cspan\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52669660987715,"sku":"","price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/BensonAmpsGermaniumBoost.png?v=1769686582"},{"product_id":"electronic-audio-experiments-the-bard","title":"Electronic Audio Experiments The Bard","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe Bard is an homage to one of our favorite misunderstood amplifiers of the past: the Music Man HD130. Manufactured from 1974 to 1984, these amps combined a solid state preamp with a tube power amp, an unusual choice that lead to them being gravely underrated in their time. But the HD130 and its siblings are some of our favorite amps thanks to their pristine (but not quite vintage) clean tones, trashy overdrive, and very wide frequency response that suits both guitar and bass. We editorialized our favorite parts of it into a compact overdrive pedal: The Bard.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Bard’s circuitry resembles a classic 1960s American amplifier reimagined with op amps in the place of tubes. The clean tones are clear and sparkly, with a gentle dip in the midrange thanks to the passive tone stack. Increasing Drive delivers medium gain sounds with a glassy edge, especially when the Bright switch is active. At the highest Drive settings, the op amps distort in a way that is unapologetically not “tube-like”—a hallmark of the original amps. The tone stack is located before the primary gain stage and can emphasize specific textures within the overdriven sound. The Bard is a versatile performer that will effortlessly traverse between traditional and angular stylings.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eControls: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Level: Output level. Handy as a boost!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• Drive: Increases the gain, from clean to touch sensitive to heavily overdriven. The taper of the control\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eis highly influenced by the EQ settings and the position of the Bright\/Normal switch.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• Low: passive bass control, with about 15dB of range below 300Hz. Higher settings will make the drive\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003emore fuzzy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• High: passive treble control, approximately 15dB of range between 1kHz-4kHz. Higher settings will\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eincrease gain for high frequencies, sharpening the drive sound.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• Bright\/Normal Switch: Changes the treble contouring of the Drive control. At low drive settings, adds\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ea glassy character. As drive is increased, the switch is more subtle. At maximum drive, the switch makes no discernible difference in the sound.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• 125B enclosure (121mm x 66mm footprint)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• True bypass with relay switching\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• Power: 9VDC center negaGve @ 60mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• 200kΩ input impedance @ 1kHz\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• \u0026gt;5kΩ output impedance @ 1kHz\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52734770512195,"sku":"","price":249.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/ElectronicAudioExperimentsTheBard.png?v=1769688357"},{"product_id":"electronic-audio-experiments-0xeae","title":"Electronic Audio Experiments 0xEAE","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe 0xEAE Boost is the first entry in a new pedal series developed in conjunction with the design collective Obstructures.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe 0xEAE collaboration began as an indestructible enclosure created in the distinct, utilitarian-yet-elevated visual language of Obstructures, culminating in a neo-brutalist homage to the iconic sloped fuzz enclosures of the 60s and 70s.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe exterior physical design and our shared affinity for noise rock informed the intent of the circuitry within: a versatile signal boost\/overdrive with the potential for a razor-sharp treble response and excessively high output levels. The circuit itself is comprised of a discrete op amp gain stage with a treble boost in front, forming a densely textured upper midrange character laden with higher order intermodulation products. A mix of active and passive tone controls allows for dramatic alterations in sonic character. We also took extreme measures to engineer a high-quality power supply that is fully protected from excessive voltage, improper setup, and external interference.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe end result is an object that is maximally robust, designed for a lifetime on the road, on stage, and in the studio\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eControls:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMaster: Output volume level. Ranges from -∞ dBu to an excess of +20 dBu. (Use judiciously.)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFilter: Passive, variable frequency low pass filter. Slide right to cut high frequencies. Cutoff frequency ranges from outside the audio range at minimum to 480Hz at maximum. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eGain: Primary gain stage. Adjustable from approximately +26 dB to +46 dB. Slide right to increase gain. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFocus: Input treble boost. Ranges from +0 dB to +26 dB for high mid frequencies. Slide right to add saturation and harshness.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFootswitch: Effect activator.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBypass: Relay switching with op amp buffered bypass; red\/green LED indicator. (Note: alternate firmware with traditional on\/off action is available upon request.)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eInput impedance @ 1 Khz: 2.2MΩ\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOutput impedance @ 1 Khz: \u0026lt;1kΩ\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePower: 9V DC, 2.1 mm center negative barrel. The current draw when active is 120 mA. We recommend a regulated, isolated power supply rated for 200 mA minimum. The PSU input is protected against reverse polarity and over-voltage. Our pedals do not accept batteries. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDimensions: 6.75” x 3.5” x 2”\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWeight: 1.5 lbs\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52735366791491,"sku":"","price":375.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/ElectronicAudioExperiments0xEAE.png?v=1769689343"},{"product_id":"electronic-audio-experiments-limelight-v2","title":"Electronic Audio Experiments Limelight V2","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eLimelight is a dual channel overdrive developed in collaboration with LA-based punk band Touche Amore. The distinctive bright, clear tones of guitarists Nick Steinhardt and Clayton Stevens form the foundation of TA’s impassioned brand of post-hardcore, letting their riffs morph effortlessly between serene clean passages and cacophonous blast beats. This pedal was originally developed to commemorate the release of their 2020 LP, Lament, but since earned its place in a wide variety of guitar rigs spanning genres.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIn preparation for the recording of Lament, we worked with Nick and Clayton to create a new op amp overdrive with equal parts aggression and chime. While loosely based in the “breaker” lineage, we made significant changes to the circuit for superior articulation and a much wider range of gain. An independent front-end boost rounds out the package, perfect for adding power to clean tones or pushing the overdrive side into heavy distortion. While the primary goal was to help the band sound like their best selves, Limelight has a tone for everyone.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eControls:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBoost – adjusts the Boost channel from 0dB to +21dB of clean gain when turned clockwise.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDrive – Simultaneous control of two gain stages, with a natural midrange boost as you turn it clockwise. Achieves approximately 50dB at the maximum setting.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTone – Adjustable low pass filter, clockwise for more treble and counterclockwise for less.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eVolume – Output level control, turn clockwise for more volume. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFocus – Variable low cut in the drive section, adjusts the amount of chime and midrange presence.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLeft footswitch – Engages drive circuit\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRight footswitch – Engages boost circuit\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecs:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndependent boost and drive circuits with relay-based true bypass switching which defaults to bypass in the event of power loss.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eInput impedance @ 1Khz: 500kΩ (boost\/drive)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOutput impedance @ 1Khz: 1kΩ (boost), \u0026lt;5kΩ (drive)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePower: 9VDC, 2.1mm center negative barrel. The current draw is 80mA with both channels engaged. \u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52735408701763,"sku":"","price":315.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/ElectronicAudioExperimentsLimelightV2.png?v=1769689498"},{"product_id":"electronic-audio-experiments-surveyor-v2-5","title":"Electronic Audio Experiments Surveyor V2.5","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe Electronic Audio Experiments Surveyor is a compact re-interpretation of the Instrument Voicing Preamp (aka IVP), a cult classic and long discontinued rackmount preamplifier. The IVP is best known for its distinctively clangy tone and harsh attack at high treble settings—especially in conjunction with an aluminum neck guitar, single coil pickups, and full range speakers—but its unique solid-state voice transcends genre labels.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Surveyor features a unique, transformer-loaded “Tube Voice” distortion generator that is highly responsive to the frequency content of the input signal. This is achieved by placing a two-band shelving EQ before distortion is applied—the complete opposite of most drive pedals. Using this method, gain may be selectively applied to a specific frequency band: boost the treble for that signature clang, or maximize the bass for fuzz overload. This variety of saturated textures isn’t just for guitar, either! The Surveyor is equally at home on bass, synthesizers, drum machines, even vocals. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eControls:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLevel: overall volume, with more than enough range for line level output or to overdrive the next thing in your signal path\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eGain: amount of overdrive\/saturation equally applied to all frequencies; highly interactive with the Bass and Treble settings\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBass: pre-clipping low shelf boost\/cut, +\/-12dB @ 100Hz\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTreble: pre-clipping high shelf boost\/cut, +\/-12dB @ 3KHz\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eHi\/Lo (switch): sets the range of the gain control, +0dB in the Lo position and +14dB in the Hi position\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSize\/Weight: 121mm x 66mm x 40mm, 0.4kg\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBypass: Relay switching with true bypass\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eInput impedance @ 1 Khz: 1MΩ\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOutput impedance @ 1 Khz: \u0026lt;1kΩ\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePower: 9V DC, 2.1 mm center negative barrel. The current draw is 70 mA.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWe recommend a regulated, isolated power supply rated for 100 mA minimum. The PSU input is protected against reverse polarity and over-voltage up to 24V. Our pedals do not accept batteries. \u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52735621693763,"sku":"","price":319.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/EAE_Surveyor_STOCK_1copy.jpg?v=1741604749"},{"product_id":"electronic-audio-experiments-model-fet","title":"Electronic Audio Experiments Model feT","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe Model feT is a transistor-based preamplifier designed around the legendary Sunn Model T amplifier. Those who have played the original know that while it excels at heavy tones when pushed, it is far more than just an amp for stoner rock and doom metal. In fact, on its own it is a rather clean amplifier with a tone that is dark yet clear and present—making it an exceptional pedal platform. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMost famous Model T tones come from putting a distortion or fuzz in front of the amp. Thus, the Model feT is designed to sound good on its own and with other pedals stacked in front. This pedal goes beyond the standard triode-to-JFET emulation approach with the inclusion of an emulated power amp. This broadens the range of gain and—in the true spirit of the original amp—allows for massive headroom and volume output. This greatly expands its capabilities beyond a typical drive pedal: the Model feT can be used directly into a power amp, cab simulation, or DAW. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eControls:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNormal: turn clockwise to add gain from the parallel “Normal” channel, which has a neutral voicing. Higher settings produce a thicker gain sound. The normal channel is fully muted when this control is at zero. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBrite: turn clockwise to add gain from the parallel “Brite” channel, which is voiced for extra midrange and sparkle. Adds bite to the drive tone at higher settings. The “Brite” channel is fully muted when this control is at zero.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBass, Midrange, Treble: 3-band FMV EQ with the same moderately mid-scooped voicing as the original amp: highly interactive and nonlinear, but familiar. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMaster: sets overall output volume. This control is capable of high volumes in order to access quieter clean settings and to properly drive an external power amp. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBypass: Relay switching with true bypass\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eInput impedance @ 1 Khz: 500kΩ\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOutput impedance @ 1 Khz: 1kΩ\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePower: 9V DC, 2.1 mm center negative barrel. The current draw is 65 mA.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWe recommend a regulated, isolated power supply rated for 100 mA minimum. The PSU input is protected against reverse polarity and over-voltage up to 24V. Our pedals do not accept batteries.\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52735674515779,"sku":"","price":319.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/ElectronicAudioExperimentsModelfeT.png?v=1769690394"},{"product_id":"electronic-audio-experiments-longsword-missing-weight","title":"Electronic Audio Experiments Longsword","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe Electronic Audio Experiments Longsword is yet another contender in the endless void of op-amp based drive pedals, but it is one that takes the topology in a novel direction. Cascaded gain stages allow for the full range from clean boost to massive distortion, all without sacrificing tonal flexibility. The equalizer combines bass and treble shelving filters with an active, frequency-selectable midrange boost\/cut control. This lets the user sculpt a diverse array of tones and carve out a niche in even the most dense of mixes. The Longsword has a broad frequency response which makes it work equally well with guitar, baritone, and bass.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eControls:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLevel: output volume\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDrive: go from light grit to heavy overdrive\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLow\/High: James\/Baxandall tone stack (shelving filters)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMid: active midrange boost\/cut\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eShift: selects frequency controlled by Mid pot\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDiode: selects between clipping diodes, to alter dynamics and headroom\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUp: MOSFET clipping, medium compression\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCenter: no diodes, minimal compression\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDown: Silicon diode clipping, maximum compression\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBoost (Footswitch): engages a front end mid boost\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBoost (Knob): adds up to 20dB of gain when the Boost is engaged\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBypass: Relay switching with true bypass\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eInput impedance @ 1 Khz: 500kΩ\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOutput impedance @ 1 Khz: 1kΩ\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePower: 9V DC, 2.1 mm center negative barrel. The current draw is 75 mA.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWe recommend a regulated, isolated power supply rated for 100 mA minimum. The PSU input is protected against reverse polarity and over-voltage up to 24V. Our pedals do not accept batteries. \u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52735739134275,"sku":"","price":319.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/ElectronicAudioExperimentsLongsword.png?v=1769690624"},{"product_id":"greer-amps-moonshot-missing-weight","title":"Greer Amps Moonshot","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe Greer Amps Moonshot is our take on a true classic circuit. This pedal is inspired by vintage Germanium preamp circuits of days gone past. Featuring two controls, the Moonshot has a great tonal range, and can provide wonderful texture, when pushing the front end of an amplifier. The Treble\/Mid control allows the player to set this pedal as a treble booster, or roll some extra low-end into the circuit, giving more midrange girth and grunt from the Germanium AC-128 transistor. The Master Volume control allows the user to push an amp into snarly overdrive. The Moonshot’s circuit features a voltage inverter, to run the transistor in proper, positive ground mode, while using a standard negative ground power supply.\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52823606886723,"sku":"","price":239.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/GreerAmpsMoonshot.png?v=1769691849"},{"product_id":"greer-amps-royal-velvet-missing-weight","title":"Greer Amps Royal Velvet","description":"\u003cdiv class=\"labelCellPair hover-container labelCellPair--formModeV2 flex\"\u003e\n\u003cdiv class=\"cellContainer\"\u003e\n\u003cdiv data-columntype=\"multilineText\" aria-readonly=\"true\" data-testid=\"cell-editor\"\u003e\n\u003cdiv class=\"flex-auto flex baymax\"\u003e\n\u003cdiv class=\"flex flex-auto flex-column readOnly readFirstMultilineTextCellEditor formModeV2MultilineTextCellEditor visualRefresh2022 rounded-big\"\u003e\n\u003cdiv class=\"col-12 contentEditableTextboxContainer\"\u003e\n\u003cdiv aria-multiline=\"true\" role=\"textbox\" class=\"contentEditableTextbox light-scrollbar ignore-baymax-defaults pb-half editingDisabled\"\u003eGreer Amps expands the XFR line with a new offering! The Royal Velvet Class-A British Drive and Pre nails the feel and tone of two of Nick Greer’s favorite amps. Imagine a world in which a V*x 30 watter and a Greer Thunderbolt30 got together. In that world, you’d end up with a sound machine much like the Royal Velvet. This British drive and pre features the same transformer as the previously released, award winning SOMA63. After a year of working with this super versatile transformer, we have found a way to alter the feel of it by changing the “loading” of the transformer. This really brings the pedal to life, and makes it something truly unique in the space of drive pedals today. If you’re looking for that Class-A British grind with some chime on the top end, this beauty is what you need. The EQ is dialed in right between the AC and Thunderbolt30 tones, and the drive is oh so sweet. At 9 volts, you’ll get some grind and slight compression with the gain up and moderate output pickups. 18 volts provides more of a stiff feel, and more clean headroom with that British sparkle!\u003cbr\u003e\u003cbr\u003eClassic British tone, drive, and grind!\u003cbr\u003eFeatures a steel core transformer!\u003cbr\u003eCan be used as a preamp, and takes drives amazingly well (stack it--it sounds great when it's stacked with other drives)!\u003cbr\u003eTrue Bypass!\u003cbr\u003eUses 9-Volt battery or standard neg. center, 2.1mm power supply.\u003cbr\u003eBuilt with top quality components\u003cbr\u003eLifetime Warranty to the original owner!\u003cbr\u003ePedals are currently built to order, and will ship within 1-2 weeks of your order and payment\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"labelCellPair hover-container labelCellPair--formModeV2 flex\"\u003e\n\u003cdiv class=\"labelContainer mr2 mt-half\"\u003e\n\u003cdiv class=\"flex pointer\" role=\"button\" tabindex=\"-1\"\u003e\n\u003cdiv class=\"flex-auto flex-inline items-baseline\"\u003e\n\u003cdiv class=\"fieldLabel quiet text-dark fit break-word white-space-normal hyphens\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cellContainer\"\u003e\n\u003cdiv data-columntype=\"text\" aria-readonly=\"true\" data-testid=\"cell-editor\"\u003e\n\u003cdiv class=\"flex-auto flex baymax\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52823641358659,"sku":"","price":279.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/GreerAmpsRoyalVelvet.png?v=1769698559"},{"product_id":"greer-amps-soma-63","title":"Greer Amps Soma 63","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA brave new world of tone, the SOMA ‘63 Vintage Preamp is the first pedal in the XFR series of pedals from Greer Amps. The SOMA ’63 is a true vintage preamp, based on the tone and feel of vintage brown era amplifiers from California. This pedal simulates the entire preamp, phase inverter, power section, and even the feel of the vintage 10 inch Utah speakers that were in those famous brown amps. The tone stack is designed to provide a wide and dynamic range of tonal options to the user. The Presence control works with the tone stack, and is designed to be a wide range control, effecting the overall sound of the entire circuit. The SOMA ’63 features a steel core transformer in the audio signal path. The transformer lends to the overall tone shaping of the circuit, and when the gain is pushed hard, especially with higher output pickups, the small steel core transformer will saturate, just like a vintage amplifier. The SOMA ’63 can be used as a tone-shaping preamp, or as an overdrive pedal. There are a wide variety of tones available in the SOMA ’63, so spend some time with your new pedal, and find the tones that rock your world!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe SOMA ‘63 runs off of a standard, negative center pin 9 volt power supply, and can be ran off of up to 18 volts. At 9 volts, the SOMA ‘63 will have more grit and texture. At 18 volts, you can expect higher headroom, a bit stiffer response, and less overall grit. Greer Amps’ lifetime warranty covers manufacturing defects and component failure to the original owner, it does not cover misuse or abuse.\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52823657349443,"sku":"","price":279.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/GreerAmpsSoma63.png?v=1769698620"},{"product_id":"greer-amps-tomahawk-deluxe-drive","title":"Greer Amps Tomahawk Deluxe Drive","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe Tomahawk Deluxe Drive is a great medium gain “second stage” overdrive pedal. This beauty barks and snarls, but it can also lean back and simply shift your tone just a bit. This pedal CAN RUN ON 9 AND 18 VOLTS. Now that we’ve addressed that, let’s talk about some of the characteristics of this pedal. This pedal has a purposeful EQ shift that puts it squarely in the “tweed” type tonal range. At 9 volts, it compresses slightly, like the big box tweed amps do, but still has some stiffness to it, just like those wonderful tone boxes did. At 18 volts, this beauty has increased headroom, AND becomes a bit more stiff, in a lovely way. The Tomahawk is a touch sensitive, dynamic recreation of this classic sound that has a natural and instantly familiar drive texture found on classic albums from so many genres. Grab a tomahawk and add this classic American tone to your tonal palette.\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52823779475779,"sku":"","price":239.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/GreerAmpsTomahawkDeluxeDrive.png?v=1769698840"},{"product_id":"greer-amps-sure-shot","title":"Greer Amps Sure Shot","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe sound of an amp, barely holding itself together is something to behold. The tone of a good amp walking the knife edge between clean and drive…there’s something there that just doesn’t exist anywhere else, and when you push it just a bit further, you can truly find bliss. That’s where the Sure Shot Clipping Boost comes in! \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe Sure Shot Clipping Boost is a different kind of boost. Is it high headroom? NO! Is it Germanium? Again, NOOOOPE! This boost is designed to get dirty, but it does so in a very special way. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Sure Shot has one single control on its face. The LOUD control does just that, it makes you loud, but…it does it in a way that is unique amongst boosts. As you increase the LOUD control, the Sure Shot will push your amp into overdrive, while it also pushes a pair of MA856 clipping diodes. This results in a very special tone—a LAYERED drive effect, in which the amp AND the pedal are both beginning to overdrive. Now, this alone is truly special…but wait…there’s more. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIf you run this in front of your favorite boost, overdrive, distortion, or even a second Sure Shot, you’ll find that it adds texture and juiciness to those sounds. The audio image of the Sure Shot is purposely rooted in the 1970’s, with some areas slightly peaked out, and some frequencies tamped down just a bit. This audio image presents itself more as the LOUD knob is increased, and it is truly glorious. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Sure Shot works wonderfully with all genres of music, from spanky country music to heavy chugging metal. I know this all sounds crazy…and maybe it is. It’s a clipping boost…it clips…on purpose…and it sounds amazing when it does! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Sure Shot is the first pedal from Greer Amps in the mini pedal format. It features true-bypass switching, and runs off of 9 volts only. We built this pedal with top tier components, and we are proud to offer this tiny little wonder to you. The Sure Shot has a 5 year warranty on it, and as always, we stand behind our workmanship…you’re going to love the way you sound with the Sure Shot Clipping Boost.\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52823798022467,"sku":"","price":189.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/GreerAmpsSureShot.png?v=1769699252"},{"product_id":"milkman-sound-pop-top-boost","title":"Milkman Sound Pop Top Boost","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe new Pop Top Boost from Milkman Sound takes its inspiration from the classic American recording consoles of the 1970s. We designed a discrete Op Amp which fits the standard 2520 footprint and put it into a modern pedal enclosure for use with guitar or any other instrument that uses\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1\/4” phone connectors. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Pop Top takes power from a common 9V center negative pedal \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003epower supply and converts it to 36V of internal headroom (that’s more than a tube has!). This unusually large amount of headroom has many practical uses ranging from a 30dB clean signal boost, a unity gain buffer with midrange focusing detail, or a line driver. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWe designed the Pop Top to run at “unity gain” with the control set at zero. At unity you can hear the discrete op amp color and find a sweet spot without dropping any signal. There is enough headroom inside to use the Pop Top at the very end of a pedal chain even in tandem with other gain and boost pedals. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAs a preamp, the Pop Top can enhance the subtle details of the source in the same way that a microphone preamp in a classic American recording console would. In the 1970s discrete op amps were designed to be used at the input and output stage to both preserve detail and slam magnetic tape with as much signal as was necessary to capture the sound. The Pop Top is designed to inspire some of that same magic and creativity from the world of \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eclassic record production but in a much more guitar friendly package.\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52950029599043,"sku":"","price":279.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/MilkmanSoundPopTopBoost.png?v=1769705970"},{"product_id":"thorpy-fx-dan-solo-missing-ean","title":"ThorpyFX Dan Solo","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eA simple musical accessory that boosts the upper midrange of a guitar signal to make solos and lead lines stand out above chord\/rhythm work. It also creates a mild overdrive when pushed fully which will work well with any classic valve guitar amp designs that have no channel switching or preamp drive, as well as newer designs and solid-state amps alike. Uses a special design analogue Class A discrete transistor circuit for the ultimate in sound quality and transparency of tone, which is switched out with True (Hardwire) bypass.\u003cbr\u003e\u003cbr\u003eThis pedal may be set subtly (clean) and progressively boost (semi-clean) and can be used to push a bigger level into the input of a valve amp, thereby adding a subtle distortion and tonal fatness. Also, the “PEAK” control gives a progressively variable bandwidth content, ranging from just perceptible (broad across most frequencies) to a blatant centring around ~2kHz, with a gradual action. Please note: the “PEAK” control affects both bandwidth and gain, one at the expense of the other)\u003cbr\u003e\u003cbr\u003eIn Use:\u003cbr\u003e\u003cbr\u003eTo use your TB, first either fit a fresh battery or connect a suitable power supply (see ''Powering the Pedal\") and plug your guitar into the “In\/On” socket (right hand, power jack side), which will simultaneously power up any battery you fit inside the pedal. Connect the “Out” socket (left hand LED side) to your amplifier, or\u003cbr\u003enext pedal, keeping the volume low on the amp at first (and again, before you disconnect later!).\u003cbr\u003e\u003cbr\u003eKeep the output “LEVEL” turned down low at first to avoid any loud surprises! In bypass mode, will appear the normal sound of your guitar. In effect mode (LED “on” - should be moderately bright), with the “PEAK” control at minimum and the “LEVEL” control fully clockwise, there should be a clean sound, at a similar level compared with the bypass signal. Advance the “PEAK” control and the gain should increase gradually and the bandwidth gradually narrow - you may wish to reduce the “LEVEL” setting proportionally. This should create an \"overdriven valve amp\" effect with decent sustain and bite at the highest settings, which you can adjust to taste with your guitar's volume and tone controls and pickup selector.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52983713071427,"sku":"","price":269.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/ThorpyFXDanSolo.png?v=1769772974"},{"product_id":"thorpy-fx-cogmeister-missing-ean","title":"ThorpyFX Cogmeister","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDinosaural Cogmeister is a single guitar booster\/overdrive\/distortion\/fuzz pedal, containing a trio of compatible sections arranged in fixed series pattern. These comprise the Push, Drive, and Solo sections, each featuring its own true\/hard-wire bypass stomp switch and corresponding LED.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Cogmeister pedal is a trio of compatible booster effects, which are arranged in a fixed series chain, with true\/hard-wire bypass mechanical foot switches. The central red LED is designed to dim noticeably, relative to the other two LEDs, whenever the battery gets too low and\/or supply voltage drops.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDinosaural Cogmeister controls are configured as follows: all the gain and\/or level controls are found along the top row, while the timbre and\/or tone controls are situated along the bottom row. The 3 effects are marked by the two vertical white lines, and each effect has its own bypass switch.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe 'Solo' section of Cogmeister is at the output end of the signal chain, and this may be used to give a moderate, clean 'flat' signal boost, or a progressively higher gain, but narrower bandwidth midrange boost, with increasing distortion as the PEAK control is advanced clockwise. This can be for lifting solos level, and\/or generally increasing intensity and focus. The LEV control affects the output volume of the solo section, and the whole pedal when the green LED is on. This is worth knowing when things get loud!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDinosaural Cogmeister's 'Drive' section in the center is an overdrive\/booster, with a modified EQ curve and greater tonal options, plus an extra gain stage for more harmonics, especially when the VOL control is turned up high. The 3-position SHIFT switch modifies the low-frequency range of the adjacent TONE (low-high frequency balance) control, giving 3 distinct resulting midrange contours to suit a variety of amp and loudspeaker configurations, as well as evoking various classic amp timbres in and of itself. The SUS control determines the input gain range of this section and increases the harmonics and speeds up the rise time of the distortion when turned clockwise. A relatively clean 'warm' boost may be obtained with SUS turned down.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe 'Push' section is a late 1960s style, single-transistor treble (or more accurately, upper- midrange) booster, with an adjustable GAIN boost control, and adjustable bandwidth on the LOW control, which when set anticlockwise only boosts the upper partials (harmonics), and when turned clockwise introduces back the fundamentals (low frequencies), which also results in a 'feral', crunchy distortion with the GAIN turned up. This can drive subsequent stages into a 'pushed' overdrive distortion\/fuzz effect or drive an amplifier input harder for more intense energy and sustain: especially useful for when recording 'heavy' guitar.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDinosaural Cogmeister has an enormous gain range of the combined three sections, which essentially constitute an early 70s-style fuzz-box, with far greater versatility. The all-discrete, Class-A, silicon transistor circuitry gives an authentic, vintage sound, and each section has its own unique distortion characteristics.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e7.25\" L x 4.5\" W x 1.5\" H\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1.55 lb\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCurrent consumption at 9 volts DC is between 7 and 16mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTrue Bypass footswitches\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePower Supply (sold separately): this pedal can use a 9-volt battery, or the standard 2.1mm plug, 9 Volt DC, Center-Negative power supply, (like most all guitar pedals use), up to a maximum of 12-volt power supply. A high-quality, stand-alone power supply is recommended for best sound and lowest noise at high gains. Any power supply higher than 12 Volt DC can damage the pedal.\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52983744823619,"sku":"","price":429.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/ThorpyFXCogmeister.png?v=1769773096"},{"product_id":"thorpy-fx-electric-lightning","title":"ThorpyFX Electric Lightning","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eTHE ELECTRIC LIGHTNING is a creation designed to meet the exacting needs of Chris Buck who utilizes a wide palette of sounds from crystal clear and punchy cleans through to nicely saturated overdrive. THE ELECTRIC LIGHTNING has two sides: a complex valve overdrive with 3 band Eq and a high headroom super clean boost on the right. The pedal is designed so that the boost runs into the valve overdrive side. This arrangement yields three distinct tonal variations ranging from clean boost all the way through to full and fat saturation. The pedal is designed to clean up impeccably from your volume control and as such it is ideal for dynamic players who like to constantly adjust their playing style.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eVOLUME: Use this control to increase the volume output of the drive side of pedal.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eGAIN: This control is used to increase the level of drive available on the drive side of the pedal, everything from lightly crispy through to heavier sounds is available here.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBASS: This control gives allows you massive amounts of control over the bass response of the drive. Clockwise yields bass rich sounds. A little can go a long way, the EQ is powerful enough to cope with most backlines of varying EQ character. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMIDS: This control gives allows you massive amounts of control over the mids response of the drive. Clockwise yields mids focused sounds. A little can go a long way, the EQ is powerful enough to cope with most backlines of varying EQ character. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTREBLE: This control gives allows you massive amounts of control over the treble response of the drive. Clockwise yields treble focused sounds. A little can go a long way, the EQ is powerful enough to cope with most backlines of varying EQ character.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBOOST: This control gives you control to boost or attenuate your signal, use it on its own as part of the boost side of the pedal or when stacked into the drive it can really make the pedal sing with complex harmonics and layered overdrive. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLOWS: This control gives you control to add low end to the boost side of the pedal and fatten up your signal for crystal clear but fat clean sounds.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLEFT FOOTSWITCH: This turns the drive side on\/off.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRIGHT FOOTSWITCH: This turns the boost side on\/off.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePOWER: THE ELECTRIC LIGHTNING is designed to work at voltages of 12V DC. On power up, the inrush current can be as high as 700mA settling to 280-300mA during use. This should be provided from the supplied centre negative power supply. However, if your boards power supply can provide the requisite voltage and current requirements you can. Do not attempt to use this pedal with other voltages or polarities, the pedal can at best just not start up (limp mode) or at worst you can damage the sensitive internal electrics. Please be aware it takes a short period of time at first power up for the valve to heat to optimum level and begin working.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCOMPONENTS: To ensure consistency, reliability, low noise and tonal supremacy the ELECTRIC LIGHTNING is made with extremely high quality components. 1% metalfilm resistors, WIMA and Panasonic capacitors where possible and robust through hole plated PCB’S. In short, all of this means you won’t have to worry about your pedal and it should give you many years of inspiring tonal bliss.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWeight: 942g\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDimensions: 236x163x75mm\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52983790436675,"sku":"","price":499.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/ThorpyFXElectricLightning.png?v=1769773431"},{"product_id":"thorpy-fx-the-dane-mkii","title":"ThorpyFX The Dane MKII","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eTHE DANE MKII is the updated signature pedal of Peter “DANISH PETE” Honoré. THE DANE is put simply a tonal tool to allow Pete to achieve his signature articulate driven and boosted clean sounds from one flexible box. The use of this pedal will now allow you vast flexibility over your guitar tone and enhance and improve your sound.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOVERVIEW: THE DANE is a creation designed to meet the exacting needs of Danish Pete, However due to the design brief needing to cover the wide palette of sounds he uses, the pedal finished up being the most versatile pedal available on the market for such a clean design. THE DANE has two sides; a complex light to medium gain overdrive on the left and a high headroom super clean boost on the right. The pedal is designed so that the boost runs into the drive side. This yields three distinct tonal variations ranging from clean boost all the way through to full and fat saturation. The pedal is also designed to clean up impeccably from your volume control and as such it is ideal for dynamic players who like to adjust their playing style.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLEVEL: Use this control to increase the volume output of the drive side of pedal.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eGAIN: This control is used to increase the level of drive available on the drive side of the pedal, everything from lightly crispy through to heavier sounds is available here.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTONE: This control gives allows you massive amounts of control over the treble and bass response of the drive. Counter clockwise yields smoother sounds whilst clockwise yields brighter sounds.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBOOST: This control gives allows you massive amounts of control add high headroom clean boost to your sig- nal, use it on its own as part of the boost side of the pedal or when stacked into the drive it can really make the pedal sing with complex harmonics and layered overdrive.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLOWS: This control gives allows you massive amounts of control to add low end to the boost side of the pedal. The amount of low end on tap is fantastic for fattening up even the spankiest strat bridge pickup.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eHC\/DP: Toggle switch to allow you to choose between Heavier Clipping (like that on the left side of the Heavy Water) and the original Danish Pete Dane boost mode.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLEFT FOOTSWITCH: This turns the drive side on\/off.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRIGHT FOOTSWITCH: This turns the boost side on\/off.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePOWER: THE DANE is designed to work at voltages of 9V DC. This should be from a quality centre negative power supply such as the Gigrig Generator or Voodoo Lab Pedalpower Plus 2. Do not attempt to use this pedal with other voltages or polarities.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCOMPONENTS: To ensure consistency, reliability, low noise and tonal supremacy the DANE is made with ex- tremely high quality components. 1% metalfilm resistors, WIMA and Panasonic capacitors where possible, A Burr-Brown Op-amp and robust through hole plated PCB’S. In short, all of this means you won’t have to worry about your pedal and it should give you many years of inspiring tonal bliss.\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52983871504707,"sku":"","price":299.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/ThorpyFXTheDaneMKII.png?v=1769774065"},{"product_id":"thorpy-fx-scarlet-tunic","title":"ThorpyFX Scarlet Tunic","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eCongratulations on your purchase of THE SCARLET TUNIC. This is a pedal I describe as an Analog amp emula- tor. The project came about initially as we were asked to create a pedal that emulated a rare amp called the Selmer Treble and Bass 50. The player in question (Lee Harris - Saucerful of Secrets) wanted a pedal to provide him with the vintage amp tones Syd Barret used in early Pink Floyd music so that he could sound authentic whilst playing on the Saucerful of Secrets World Tour. In the pedal development we made sure that the Selmer was covered to- nally but as always, we went further than the initial scope of design. So, as well as the Selmer Amp we also en- sured that the DR103 and AC30 style tones could be captured successfully. Fitted with a high-quality transformer, the pedal reacts to your playing and distorts like a full-size amplifier.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOVERVIEW: THE SCARLET TUNIC as an Analog amp emulator can work fantastically well with your exist- ing amp, your existing pedals and it integrates easily into your current rig. You can use it to create classic vintage amp sounds or craft your own sound. Tested worldwide during its development on the biggest of stages, you can be confident the \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSCARLET TUNIC will deliver.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMASTER: Use this control to increase the volume output of the pedal. This balances with the gain knob and sen- sitivity switch.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eGAIN: This control is used to increase the level of drive available on the pedal. Everything from lightly crispy through to full on amp saturation is available. The scope of this control is affected by the sensitivity switch. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTREBLE: This control allows you control over the treble response of the pedal. Counterclockwise yields smoother sounds whilst clockwise yields brighter sounds.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBASS: This control allows you control over the bass response of the pedal. Counterclockwise yields brighter sounds whilst clockwise yields darker sounds.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePRESENCE: This is a powerful control and affects the upper-mids response of THE SCARLET TUNIC chang- ing the character of the pedal entirely.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDEEP SWITCH: This changes the bass character of the pedal and is like a master bass control.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBRIGHT SWITCH: This changes the brightness of the pedal and is like a master highs control.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSENS SWITCH: This changes the gain character of the pedal and is like the 1\/2 or hi\/lo input jack option you find on old amps but with 3 gain levels.\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52983889264963,"sku":"","price":299.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/ThorpyFXScarletTunic.png?v=1769776689"},{"product_id":"thorpy-fx-heavy-water","title":"ThorpyFX Heavy Water","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eHEAVY WATER is a creation designed to meet the requests we were receiving to release the Boost side of the DANE as a standalone pedal. So not one to disappoint, we went ahead and did just that….but in typical Thorpy fashion it went one step further. Therefore, HEAVY WATER has two sides in one of the smaller sized enclosures – the same high headroom super clean boost from the DANE pedal on the right. On the left we tweaked the boost to provide more volume but with a grittier\/dirtier character from the Germanium diodes lurking within. The pedal is designed so that each side can be used independently but they can also be combined to absolutely smash the front end of a valve amp into submission. Subtle, heavy or mental the options within the two sides will astonish.\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52983949459779,"sku":"","price":249.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/ThorpyFXHeavyWater.png?v=1769777169"},{"product_id":"thorpy-fx-warthog","title":"ThorpyFX Warthog","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe WARTHOG started off being designed to be the distortion to beat all others; however it ended up being so much more. Through minute tailoring of the circuit, the WARTHOG delivers the biggest range of tones of any overdrive\/distortion pedal on the market. With an ability to go from crystal clean boost through to distortion the WARTHOG has sonic characteristics that match the military prowess of its namesake. Its tonality is firmly in the American camp with sparkling cleans similar to the best amplifiers in that genre, With the calibre and gain controls cranked you get a crushing distortion with fuzzy overtones at the very extremes of travel. All settings are extremely addictive, with a 3 dimensional and complex sound that makes your playing jump from the fretboard.\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52984252989763,"sku":"","price":239.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/ThorpyFXWarthog.png?v=1769778693"},{"product_id":"thorpy-fx-peacekeeper","title":"ThorpyFX Peacekeeper","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe PEACEKEEPER is our take on a low gain overdrive designed to suit all guitars and all amps whilst delivering the sweetest on the edge to crunch tones you have ever heard. Hyperbole aside, this pedal has some very cunning tricks up its sleeve, by combining a post gain active Treble and Bass circuit with a pre-gain Mids\/presence control you are able to tailor the overdrive character and tonality to your exacting needs. The pre-gain mids control allows you to move from a very smooth mid scooped gain type to a more pronounced mid humped gain with all the subtleties in between. Post gain the active treble and bass controls adapt that focussed gain stage to achieve the tonality you desire\/need. Used as a subtle boost into your amp (ala Klon style) or as an \"on the Edge\" overdrive, the PEACEKEEPER will make you wonder how you sound so good!\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":52984279662915,"sku":"","price":259.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/ThorpyFXPeacekeeper.png?v=1769778830"},{"product_id":"thorpyfx-kudu","title":"ThorpyFX Kudu","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eKUDU is an overdrive that has a funny little story behind it. Dan Coggins, who you’ll know of Lovetone fame, designs pedals for ThorpyFx, but musical instruments and their associated gear remains to this day as a hobby for Thorpy. Well, knowing this, on Christmas 2024 Dan gifted me a modified pedal, which as always, sparks an idea for a new product. So, we took inspiration for this modified classic and created a pedal optimised for stacking with other pedals and amps. Why is it called KUDU? Well, there is a variant of the KUDU called the Greater Kudu and as the pedal makes everything sound better... it seemed apt.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCONTROL:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFOOTSWITCH: ON\/OFF True bypass\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLEVEL: Use this control to balance the output of the pedal. We’ve packed in plenty of volume to this pedal so you can cut and boost your signal using the level.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBITE: This control allows you to feed in the correct amount of sizzle and sparkle to your tone. It allows you to tailor the frequencies that interact with your other pedals and amps. Lower settings are smoother, whilst higher settings are more cutting.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDRIVE: This control adds or cuts the level of drive on tap. This control is very interactive with the bite control.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCLIP: Use this to change between Soft, Hard and Extra Soft clipping, allowing to change the character of your KUDU and the way the harmonics meld with other drive stages.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePLACEMENT: KUDU is designed and optimised for stacking, and this is a very personal thing. Our advice is to just have a play with placement and see where it fits your signal chain best. It’s not particularly fussy on placement but it will yield its best results when placed where you want it to be.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePOWER: The KUDU is designed to be powered by a 9V DC centre-negative 2.1mm power supply. Do not attempt to use this pedal with other voltages or polarities. We have power protection circuitry in our pedals and use of any other voltages will shut the pedal down and may require return to ThorpyFx HQ for repair. This will not be covered under warranty.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSPECIFICATIONS:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: (W)65mm x(L)125mm x(H)53mm (top of Knobs) Current Draw: 44mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTrue Bypass? Yes\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCOMPONENTS: To ensure consistency, reliability, low noise and tonal supremacy the KUDU is made with extremely high quality components. 1% metalfilm resistors, WIMA and Panasonic capacitors where possible and robust through hole plated PCB’S. In short, all of this means you won’t have to worry about your pedal, and it should give you many years of inspiring tonal bliss.\u003c\/span\u003e\u003c\/p\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":54460806365507,"sku":null,"price":259.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/Thorpy_KUDU_STOCK_1.jpg?v=1777989069"},{"product_id":"jhs-pedals-the-at","title":"JHS Pedals The AT+","description":"\u003cul class=\"fx-list product-text__list\"\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eAndy Timmons Signature Model\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eBoost \/ Overdrive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eSaturated sounds of British tube amplifiers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eIndependent boost and overdrive channels\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eTrue bypass\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eCan be operated with 18 V for more headroom\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eVolume, EQ, Drive Air and Boost controls\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003e3-Way toggle switch to select between headroom modes (25 watts \/ 50 watts \/ 100 watts)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eOverdrive footswitch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eBoost footswitch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eStatus LED\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eMetal housing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003e6.3 mm mono jack input \/ output\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003ePower supply via 9-18 V DC power supply (2.1 mm x 5.5 mm coaxial connection, polarity (-) inside - not included in delivery, suitable power supply: Art.\u003ca class=\"fx-link\" href=\"https:\/\/www.thomann.de\/ie\/thomann_nt_0910.htm\" title=\"Thomann NT 0910 AC\/PSA\"\u003e409939\u003c\/a\u003e)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003ePower consumption less than 100 mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eDimensions (L x W x H): 121 x 56 x 41 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eWeight: 260 g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"fx-list__item list-item fx-list__item--circle\"\u003e\u003cspan class=\"fx-text fx-text--plus list-item__text\"\u003eMade in USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Soft Noise Audio","offers":[{"title":"Default Title","offer_id":54520725176643,"sku":null,"price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/files\/JHS-Pedals-AT-Plus-Red-Front.jpg?v=1780395176"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/3964\/0643\/collections\/BENSON-BOOST-1800X1200-4.jpg?v=1751969219","url":"https:\/\/softnoiseaudio.com\/collections\/boost.oembed","provider":"Soft Noise Audio","version":"1.0","type":"link"}